Progress of Air Pollution Control in China and Its Challenges and Opportunities in the Ecological Civilization Era

China’s past economic growth has substantially relied on fossil fuels, causing serious air pollution issues. Decoupling economic growth and pollution has become the focus in developing ecological civilization in China. We have analyzed the three-decade progress of air pollution controls in China, highlighting a strategic transformation from emission control toward air quality management. Emission control of sulfur dioxide (SO₂) resolved the deteriorating acid rain issue in China in 2007. Since 2013, control actions on multiple precursors and sectors have targeted the reduction of the concentration of fine particulate matter (PM_2.5), marking a transition to an air-quality-oriented strategy. Increasing ozone (O₃) pollution further requires O₃ and PM_2.5 integrated control strategies with an emphasis on their complex photochemical interactions. Fundamental improvement of air quality in China, as a key indicator for the success of ecological civilization construction, demands the deep de-carbonization of China’s energy system as well as more synergistic pathways to address air pollution and global climate change simultaneously.     

基于弥散燃料颗粒开裂的金属基体裂纹特征模型

金属基弥散燃料元件在特殊工况下会发生表面起泡失效。燃料颗粒开裂是金属基体开裂的前提条件，只有当金属基体开裂后元件才会发生表面起泡。燃料颗粒开裂后，裂纹宽度和塑性区长度等裂纹特征决定了金属基体开裂行为。基于弹塑性断裂力学和应力平衡条件，建立了基于弥散燃料颗粒开裂的金属基体裂纹特征模型。计算结果表明：裂纹张开位移随退火温度和燃耗深度的升高而增加；裂纹尖端塑性区长度主要与退火温度相关。裂纹张开位移和塑性区长度的计算结果与实验数据均符合较好，验证了金属基体裂纹特征模型的有效性。     

建筑产业转型升级新时代下高职建筑工程技术特色专业建设问题的新思考

随着建筑业技术进步和转型升级,高职建筑工程技术专业建设应顺应新时代要求,产教融合,办出特色。本文提出了“四个对接一个融合”的特色专业建设新思考。     

喷淋液滴在空气环境下的运动特性

本文以喷淋液滴在空气环境下运动特性为工程背景，建立单个液滴在常温、常压空气环境中的动量方程，分析液滴沉降特性、追赶特性及运动轨迹行为。计算结果表明，不同喷淋液滴初始条件下，短时间内存在重力大于曳力和重力小于曳力两种情况，但最终减速液滴均会达到受力平衡状态；液滴离开喷淋头后，垂向位移均迅速增大，液滴粒径越大、初始速度越大，垂向位移增长的速率也越大，达到相同位移的用时越短；液滴尺寸、初始速度相差越大，液滴追赶所用的时间越短，追赶位移越小，液滴尺寸、初始速度越接近，液滴追赶所用的时间越长，追赶位移越大；液滴初始速度越大、初始直径越大、喷射角度越大，横向速度消失越慢，达到的横向位移越大，喷射液滴覆盖的面积也越大。计算结果有助于优化工程实际中喷淋系统的设计与布置。     

配加预处理脱硫灰对铁矿烧结基础特性的影响

 半干法脱硫灰堆弃处理占用土地且容易造成二次污染,将脱硫灰预处理后替代CaO熔剂配入烧结有望充分利用其中的熔剂组分,实现脱硫灰在钢铁企业的闭路资源化利用。研究了脱硫灰配加焦粉加热分解特性及替代CaO熔剂配加对铁矿粉烧结基础特性的影响。结果表明,配加1%焦粉可以有效提高脱硫灰分解率,减少CaSO₄的生成。随着预处理脱硫灰替代CaO比例的增加,铁矿粉同化温度和黏结相强度呈现先增加后减小的趋势;液相流动性呈现单调增加趋势,当替代比超过40%时,液相流动性形成了流动性很大的“假象”;黏结相微观结构表明,替代比例小于40%时,有利于烧结试样中铁酸钙的生成;综合考虑,最佳的替代比例应小于40%。     

Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal

Constant- and varied-depth nanoscratching tests of GGG single crystal were carried out at different scratching velocities. The morphologies of the scratched grooves and chips were analysed using scanning electron microscope. The experimental results indicated that higher scratching velocity led to shallower penetration depth, shallower residual depth, and larger continuous chips. Increasing the scratching velocity could effectively improve the plasticity and reduce the brittle-to-ductile transition depth of GGG single crystal. Based on the contact stress and contact area between the analysed sample and Berkovich indenter, a model for predicting the penetration depth was developed, which took into account the strain rate effect and elastic recovery of materials. The model was verified using constant- and varied-depth nanoscratching tests, and the predicted and experimental results were in good agreement. Subsurface damage underneath the ductile surface was characterised using transmission electron microscope. The TEM results demonstrated that higher scratching velocity led to the slipping planes appearing in more directions, which prevented the generation of long slipping plane and reduced the depth of the damage layers. The plastic deformation of GGG at the scratching velocity of 100 μm/s was dominated by poly-crystalline nanocrystallites and amorphous phases, and was similar to that at the low scratching velocity. This study provided a fundamental understanding of the strain-rate dependence of surface/subsurface deformation mechanisms of GGG during ultra-precision machining.     

Investigation on the mechanism of charge generation in organic heterojunctions: Analysis of I–V and C–V characteristics

The charge generation mechanism of organic heterojunction (OHJ) consisted of 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile (HAT-CN) and different hole transporting materials (HTMs) are studied systematically by current-voltage (I–V) and capacitance-voltage measurements. The analysis of I–V characteristics of the devices based on OHJs at forward and reverse voltages by comparing the thickness of HTM layers finds that a forward and reverse symmetrical I–V curve is observed at thin HTM layers and the forward current becomes larger than the reverse current with the increase of HTM thickness, fully illustrating the effectiveness of OHJ charge generation. Moreover, the I–V characteristics at different temperatures indicate that the efficient charge generation is originated from electron tunneling rather than diffusion. And the C–V and capacitance-frequency (C–F)characteristics further illustrate the highly efficient charge generation ability of OHJs so that the charge density is as high as 4.5 × 10¹⁷ cm⁻³, guaranteeing the high conductivity of OHJs, which is very beneficial to developing highly efficient OLEDs using OHJs as charge injector and generator.